Rudolph Lopez Presents at AWG, May 2010

Rudy Lopez provided a great demonstration on turning an end grain vase from a log at the May 19th Guild meeting at Woodcraft.  He kept everyone on the edge of their seats overtime!   Here is the handout Rudy provided us and a couple links he referenced during the demonstration.  Thanks Rudy!

        

Rudy’s Handout - End Grain Vase [...]

May 20th, 2010 | Category: Notes From Meetings

AWG Presidents Message – 5/19/10 Meeting

AWG members, 

May Demonstration.  This Wednesday, 5/19/10, we will host Rudy Lopez from Tampa Florida. Rudy will turn an end grain vase as his demonstration piece. Rudy was at last month’s Southern States Symposium in Gainesville and proved to be an excellent demonstrator!  You can read more about him and his attitudes towards woodturning here:  http://atlantawoodturnersguild.org/wp/2010/05/meeting-notice-may-19-2010/#more-904

[...]

May 16th, 2010 | Category: Presidents Message

Guild Talent at April Meeting

Guild members brought these pieces to our April 21st meeting. Enjoy them here and in this month’s Show and Tell slideshow.

Ken Rizza

[...]

April 28th, 2010 | Category: Show and Tell

AWG Presidents Message – 4/21 meeting

AWG members,  April Demonstration.

We are delighted to have George Hatfield of Sydney, Australia joining us this Wednesday! George is one of the established great turners and has dedicated much of his life to teaching woodturning.  I expect we’ll have a pretty full house.

If you’d like more info on George Hatfield, here’s a short [...]

April 21st, 2010 | Category: Presidents Message

Guild Talent at March Meeting

These pieces were brought in by guild members to our March 2010 meeting at Woodcraft.  The membership had suggested we showcase these pieces so everyone can see the talents of the guild’s skilled members.  The pictures are posted in alphabetical order this month.  And thanks very much to Oliver Buettner for taking all pictures at our meeting!

April 4th, 2010 | Category: Show and Tell

Mark Sfirri Teaches at March Guild Meeting

Mark Sfirri taught guild members a thing or two about multi-axis turning during the March 2010 meeting at Woodcraft.  Here are just a few examples of is work.

(Harvey… is that you on the camera?)

[...]

April 4th, 2010 | Category: Notes From Meetings
« Newer Entries  
  Older Entries »